Rain Gauge, TR-525M, Metric Heated

The Texas Electronics, Inc. TR-525M Rainfall Sensor is a remote tipping bucket style rain gauge that measures the amount of liquid precipitation. The TR-525M rain gauge is a freestanding receptacle for measuring precipitation.


It contains an open top, which allows rainfall to fall into the upper portion, which is called the collector. Collected water is funneled to a mechanical device (tipping bucket), which incrementally measures the rainfall accumulation and causes a momentary closure of a switch. As water is collected, the tipping bucket fills to the point where it tips over. This action empties the bucket in preparation for additional measurement. Water discharged by the tipping bucket passes out of the rain gauge with no need for emptying.


The TR-525M was designed to meet the need for a rugged and reliable metric rain gauge tipping bucket with high accuracy and low cost.


This unit is a TR-525M equipped with a rain gauge heater, the HT-525, for use where snow or freezing weather may occur. The rain gauge heater assessory consists of two low-power heating elements that prevent snow or sleet from accumulating in the collector and disrupting rainfall readings. The heater are thermostatically controlled with an additional thermal overload. The heater are ideally balanced to keep the gauge clear at all times yet minimize the amount of evaporation. 

Availability: In stock

$725.00
Bulk Discounts Available
  • Buy 5 for $688.75 each and save 5%
  • Buy 15 for $670.63 each and save 7.5%
  • Buy 30 for $652.50 each and save 10%
  • Buy 100 for $634.38 each and save 12.5%

* Required Fields

Rain Gauge, TR-525M, Metric Heated

Double click on above image to view full picture

Zoom Out
Zoom In

Additional Information

Resolution 0.1 mm Metric
Accuracy 50 mm per hour; +/-1%
Collector Diameter 9.66" (245 mm) with knife-edge
Funnel Depth 7.2" (183 mm)
Splash out Protection >2" (50 mm)
Operating Temp 32 to 158°F (0 to 50°C)
Storage Temp -40 to 185°F (-40 to 70°C)
Humidity Limits 0 to 100%
Weight 8 lbs.
Height 12" (305 mm)
Cable 25', 24 gauge 2 conductor
Switch Momentary potted reed switch
Switch Rating 30 VDC @ 2 A, 115 VAC @ 1 A
Switch Closure Time 135 ms
Bounce Setting Time 0.75 ms
Pivot Ground bronze pivots with hardened stainless steel shaft
Bucket Black ABS injection molded
Level Integral Bubble Level
Range 27" (700 mm) per hour
Warranty 3 years